Mould Laser Clean Machin | Factory - LXSHOW

Good day all,
New guy here and recent purchase. Looking for any links to some very comfortable/helpful grips to aid in accuracy. I do not care near as much for esthetics as I do functionality and feel of grips. I'Plasma Cutter Cut-50 | Manufacturers - LXSHOW. I could make work as is, but was hoping people out there with far more experience than I could shed some ideas past what looks good. I plan on hunting with this thing and want all advantages possible to acquire consistent accuracy (aside from lots of practice of course). Thank you for your time,
CC

.....Looking for something a tad wider I suppose.Plasma Cutter Cut-50 | Factory - LXSHOW, I will not be rendering my firearm for shipment. I don't need a perfect fit per say, but something more molding to the hand than what came with....preferably not slick like faux ivory. Any suggestions are appreciated!

this is where I would start
Portable Fiber Laser Marking | Factory - LXSHOW

He is gooseman179 here on the forum
Cnc Plasma Cutting Machine 50mm | Manufacturers - LXSHOW


The Family

Cnc Plasma Cutting Machine 50mm | Factory - LXSHOW, A "Plow Handle"Cnc Plasma Cutting Machine 50mm | Suppliers - LXSHOW

Table Plasma Cutting Machine | OEM/ODM - LXSHOW,
Nice fam you have there. Those are looking a bit thicker up top, site says 15%. Wish I could hold a set before spending the coin, but I'll probly just have to roll the dice.Table Plasma Cutting Machine | Price - LXSHOW?Table Plasma Cutting Machine | Manufacturers - LXSHOW.

Never noticed being Slick, maybe due to the shape.Table Plasma Cutting Machine | Factory - LXSHOW. As for handling a set where you located?
Kevin

The 2nd picture with 5 in it are all .41 Mags by the way. Somehow an S&W Mod 58 snuck in there, Don't own a .44, have in the past, traded off to finance more .41's

I secound the bearpaws.Table Plasma Cutting Machine | Suppliers - LXSHOW,5 Axis Cnc Plasma Cutting Machine | OEM/ODM - LXSHOW.

Sent him this.



Got back this.

Welcome to the Forum!

5 Axis Cnc Plasma Cutting Machine | Price - LXSHOW. One, Caryc does some of the nicest grips you'll EVER see. But, he does prefer to use your grip frame to fit them.
5 Axis Cnc Plasma Cutting Machine | Manufacturers - LXSHOW, is Zane Thompson, of Lone Star Custom Grips. He goes by lscg here. He has been a great supporter of my Autism Charity match, and my NRA event.

That said,5 Axis Cnc Plasma Cutting Machine | Factory - LXSHOW, David Bradshaw who could teach you a LOT about a proper grip & how to handle a SA sixgun. Go to the "Gallery" section, look for posts by Lee Martin about David Bradshaw. Go to some older ones & you'll see what I mean.
How we grip a gun, how a gun fits us, is all important in achieving good accuracy.

_________________
Shoot straight and safe!

" A fine is a tax for doing wrong,
and a tax is a fine for doing
right! "
NRA Instructor
USPSA shooter
SASS shooter (Outlaw Joe Wales)
NRA Women On Target Instructor
5 Axis Cnc Plasma Cutting Machine | Suppliers - LXSHOW
Nuisance Wildlife Control
Scuba Instructor
Eagle Scout, BSA "When it mattered!"

Chuckbuster II: I ask about slickness due to when I hold the stock grips, if my hands are anything less than completely dry ( oil/lube is not on exterior ) then I don'200 Amp Plasma Cutter | OEM/ODM - LXSHOW. Maybe I'm oily, haha. Located in Springfield, OR. My buddy has a .41 he calls his "pimp gun" as it is so shiny. Love that caliber.

medicdave:200 Amp Plasma Cutter | Price - LXSHOW. Especially the rear profile pic. I can actually see what 15% looks like up top of the grip. Nice block, and those grips look great.200 Amp Plasma Cutter | Factory - LXSHOW.

contender: Thank you for the links. I will definitely check out those guys and see what they have to offer! as well as am usually open to hearing how to's. I am a two thumbs fwd kinda guy with my auto'200 Amp Plasma Cutter | Suppliers - LXSHOW.

Much appreciate the feedback guys. Have been out in the "tactical" world for the last several years and am finding that a good revolver and a '92 lever action make me grin more than any of the scopes, dots, lights, suppressors, etc. that I've been loading on my other stuff.Lgk 200 Plasma Cutter | Price - LXSHOW; but depending on how well I shoot this .44 SBH I may chase some fur with the pistol.Lgk 200 Plasma Cutter | Manufacturers - LXSHOW!

I find them on ebay

_________________
Aim Small, Miss Small

Counting Coup, I fully understand where you are coming from. I shoot USPSA, and the two thumbs forward is the grip I use. However, the SA revolver is a totally different design, and as such requires a different grip method. If you were anywhere near me, I'd offer you a chance to try some of my different guns & grips.
PS; I have been handgun hunting since the early 80's for deer. Killed a lot with my Contenders, but I've been totin' a SA a lot more these last few years.
Grips, gripping method,Lgk 200 Plasma Cutter | Suppliers - LXSHOW. Also, you mentioned having to have completely dry hands. You can use the stuff we use in USPSA to dry out your hands. But, a SA, especially a boomer needs to be able to "roll" a bit when fired. Due to the design,Water Bed Plasma Cutting Machine | OEM/ODM - LXSHOW. If you fight it by trying to hold the gun down like we do in shooting a semi, then you'll have issues with accuracy, just by how you are gripping it.
If you can find an experienced SA shooter to teach you how to properly hold a SA, you'll be well ahead of the learning curve.

_________________
Shoot straight and safe!

" A fine is a tax for doing wrong,
and a tax is a fine for doing
right! "
NRA Instructor
USPSA shooter
SASS shooter (Outlaw Joe Wales)
NRA Women On Target Instructor
5 Axis Cnc Plasma Cutting Machine | Suppliers - LXSHOW
Nuisance Wildlife Control
Scuba Instructor
Eagle Scout, BSA "When it mattered!"

contender, unfortunately I don'Water Bed Plasma Cutting Machine | Price - LXSHOW. Not that they don't exist, but more so than before, I'll be looking for it out at the range. My polymers have stippling and or rubber sleeves, and even my 1911s have a rubber insert and aggressive grips. Maybe time is all I need to get used to the new feel. My hand tells my brain I don'Water Bed Plasma Cutting Machine | Factory - LXSHOW. Until I drop it I guess I have a hold on it eh?Water Bed Plasma Cutting Machine | Suppliers - LXSHOW/effective. Can't sit at the cpu for hours on end researching stuff. But here and there I'Plasma Cutting Machine Kit | OEM/ODM - LXSHOW.Plasma Cutting Machine Kit | Price - LXSHOW, I'll make it work one way or another.

what do you guys thing about checkered grips?Plasma Cutting Machine Kit | Manufacturers - LXSHOW, does this tear up the hand for anyone? I don't have keyboard typing hands, but I wouldn't say they are farm or automotive hands.Plasma Cutting Machine Kit | Factory - LXSHOW?Plasma Cutting Machine Kit | Suppliers - LXSHOW. Do to my previous shooting experience I'Plasma Cutter Air | OEM/ODM - LXSHOW, and I'm not a huge fan, but not opposed to gloves I guess. Only shoot with gloves when it is damn cold out normally.

I don't do checkered grips on anything that kicks.Plasma Cutter Air | Price - LXSHOW, my brother loves them.Plasma Cutter Air | Manufacturers - LXSHOW. Might look at some smooth stag or buffalo horn as well,Plasma Cutter Air | Factory - LXSHOW.

Plasma Cutter Air | Suppliers - LXSHOW.



Not so polished elk on new xr3



Old knarly Sambar. Believe it or not the popcorn on these is smooth and rounded. Look like a meat grinder but my favorite set of grips.

MD: I like the elk ones for sure.Jinan Plasma Cutter | OEM/ODM - LXSHOW. Something that won't crack would be nice too, ironwood, cocobolo, cherry are pretty strong eh? Alright I'll take your advice on the meat grinders and pass on checkered. If I could find some unique elk grips I would probably go for it. Esthetically I like medallions but they are certainly not a deal breaker.Jinan Plasma Cutter | Price - LXSHOW, they always help! I can tell I would need a bib for the drool if I came to your house.